P.O. Box 6259,  Spring Hill,  FL 34611 
Fax:  352 666 4141 

Prowler Chrome handle Billet Dip Stick©

PART#  ACC-PRDS104

INSTALLATION INSTRUCTIONS

Included:  1 Chrome handle Oil Dip Stick
 
1.  Simply pull your stock dip stick out of your engine block.  Carefully note where your oil is on this stick. Do you need oil? if so, fill to full and retest with your old stock stick.
 
2.  Take your new Chrome handled dip stick out of the wrapper.  Carefully look at the bottom of the stick.  There is a slot cut out in the side.  This is where your oil level should be at. 
 
3.  Push your new dip stick into the oil compartment hole.  Push it firmly until you can no longer push it in.
 
4.  Pull the new dip stick out and look at the level of your oil.  Since you have ensured that your oil level is full your oil should come up to the notch cut out on your new stick.
 
5.  Be sure to check your oil as indicated by your Prowler Owners Manual.

Questions:  Please contact us at admin@TheProwlerStore.com

TheProwlerStore.com a HotCarAccessories.com website a division of emagineit, Inc.
Copyright 2005-2008